System |
|
Form Factor |
4U Rackmount |
|
Chassis Model |
FA77 |
|
Dimension (D x W x H) |
30.31" x 17.24" x 6.93" (770 x 438 x 176mm) |
|
Motherboard |
S7119GMRE |
|
Gross Weight |
43.5 kg (95.9 lbs) |
|
Net weight |
27.5 kg (60.6 lbs) |
Front Panel |
|
Buttons |
(1) RST / (1) NMI / (1) ID / (1) PWR w/ LED |
|
LEDs |
(1) HDD / (1) ID / (1) Warning / (3) LAN |
|
I/O Ports |
(1) VGA port / (2) USB 3.0 port / (1) COM Port |
Internal Drive Bay |
|
Type / Q'ty |
2.5" Hot-Swap SSD/HDD/ (14) |
|
Supported HDD Interface |
(10) SATA 6Gb/s + (4) NVMe |
|
HDD Backplane Support |
SAS 12Gb/s /SATA 6Gb/s /NVMe |
System Cooling Configuration |
|
FAN |
(5+1) hot-swap 12cm fans |
|
Redundancy |
Yes |
Power Supply |
|
Type |
RPSU |
|
Input Range |
AC 100-127V/12A / AC 200-240V/9.48A |
|
Frequency |
47-63 Hz |
|
Output Watts |
3,000 Watts (100-127Vac input) / 4,800Watts (200-240Vac input) |
|
Efficiency |
PFC / 80 plus Platinum |
|
Redundancy |
3+1 |
Processor |
|
Socket Type / Q'ty |
LGA3647/ (2) |
|
Supported CPU Series |
Intel Xeon Scalable Processor |
|
Thermal Design Power (TDP) wattage |
Max up to 205W |
|
System Bus |
Up to 10.4/9.6 GT/s with Intel UltraPath Interconnect (UPI) support |
Chipset |
|
PCH |
Intel C621 |
|
Switch IC |
(2) PLX PEX8796 |
Memory |
|
Supported DIMM Qty |
(12)+(12) DIMM slots |
|
DIMM Type / Speed |
DDR4 RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 2666 |
|
Capacity |
Up to 768GB RDIMM/ 1,536GB LRDIMM/ 3,072GB RDIMM 3DS/LRDIMM 3DS *Follow latest Intel DDR4 Memory POR |
|
Memory channel |
6 Channels per CPU |
|
Memory voltage |
1.2V |
Expansion Slots |
|
PCI-E |
(11) PCI-E Gen3 x16 slots / (1) PCI-E Gen3 x16 Tyan Mezzanine slot / (1) PCI-E Gen3 x16 slot (OCP 2.0 slot) |
|
Pre-install TYAN Riser Card |
M2217-L16-IO |
LAN |
|
Port Q'ty |
(2) 10GbE ports, (1) GbE port dedicated for IPMI |
|
Controller |
Intel X540-BT2 |
|
PHY |
Realtek RTL8211E |
Storage |
SATA |
Connector |
(2) Mini-SAS HD (8-ports) |
Controller |
Intel C621 |
Speed |
6.0 Gb/s |
RAID |
RAID 0/1/10/5 (Intel RSTe) |
sSATA |
Connector |
(2) SATA-III |
Controller |
Intel C621 |
Speed |
6.0 Gb/s |
RAID |
RAID 0/1/10/5 (Intel RSTe) |
NVMe |
Connector (OCuLink) |
(2) SFF-8612 for (4) NVMe ports |
Graphic |
|
Connector type |
D-Sub 15-pin |
|
Resolution |
Up to 1920x1200 |
|
Chipset |
Aspeed AST2500 |
I/O Ports |
|
USB |
(2) USB3.0 ports (at rear) / (2) USB3.0 ports (at front) |
|
COM |
(1) DB-9 COM port (at front) |
|
VGA |
(1) D-Sub 15-pin port (at front) |
|
RJ-45 |
(2) 10GbE ports, (1) GbE dedicated for IPMI |
System Monitoring |
|
Chipset |
Aspeed AST2500 |
|
Temperature |
Monitors temperature for CPU & memory & system environment |
|
Voltage |
Monitors voltage for CPU, memory, chipset & power supply |
|
LED |
Over temperature warning indicator / Fan & PSU fail LED indicator |
|
Others |
Watchdog timer support |
Server Management |
|
Onboard Chipset |
Onboard Aspeed AST2500 |
|
AST2500 iKVM Feature |
IPMI 2.0 compliant baseboard management controller (BMC) / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub |
|
AST2500 IPMI Feature |
24-bit high quality video compression / 10/100/1000 Mb/s MAC interface |
BIOS |
|
Brand / ROM size |
AMI / 32MB |
|
Feature |
Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / User Configurable FAN PWM Duty Cycle / Console Redirection / ACPI sleeping states S4,S5 / ACPI 6.1 |
Regulation |
|
CE (DoC) |
Class A |
|
VCCI |
Class A |
|
CB/LVD |
Yes |
|
RCM |
Class A |
|
FCC (SDoC) |
Class A |
Operating Environment |
|
Operating Temp. |
10° C ~ 35° C (50° F~ 95° F) |
|
Non-operating Temp. |
- 40° C ~ 70° C (-40° F ~ 158° F) |
|
In/Non-operating Humidity |
90%, non-condensing at 35° C |
RoHS |
|
RoHS 6/6 Compliant |
Yes |